|
 |
| *US
Prices are calculated with an exchange rate of 1.35. Rates do vary, please
check with your financial institution for the current exchange rate. |
| |
*Actual product may differ from photo. |
|
ATP 1.8T Stage II Kit
- 250-280 HP
A complete kit including: Garrett/Honeywell GT25/T28 turbocharger,
dual ball bearing trim, factory internal wastegate, exhaust
manifold adapter plate, CNC inlet adapter - 44mm outer diameter
(1/4" thick), exhaust downpipe - 55mm standard 75mm option,
CNC outlet adapter - 50mm outer diameter, 2 water banjo fittings,
2 water hoses (10"), oil feed fitting adapter, oil feed
line (48"), high rate fuel pressure regulator, EPROM (chip),
installation hardware and gaskets.
**Intercooler kit is not included with turbo kits. Must purchase
seperately.
(ATP 1.8T Stage 2)
CDN
$ 3000.00
US
$ 2224.99
*Please call for details and availability |
|
|
*Actual product may differ from photo. |
|
ATP 1.8T Stage III Kit
- 300 HP
A complete kit including: 20v 1.8T turbo manifold, Garrett/Honeywell
GT30R turbocharger, dual ball bearing trim, external Tial wastegate
35mm, oil feed set, oil return set, 3" turbo downpipe,
inlet pipe set, injector set 310cc, EPROM (chip), installation
hardware and gaskets.
**Intercooler kit is not included with turbo kits. Must purchase
seperately.
(ATP 1.8T Stage 3)
CDN
$ 4800.00
US
$ 3559.99
*Please call for details and availability |
|
|
*Actual product may differ from photo. |
|
ATP 1.8T Stage IV Kit
- 350 HP
A complete kit including: 20v 1.8T turbo manifold, Garrett/Honeywell
GT30R turbocharger, dual ball bearing trim, external Tial wastegate
35mm, oil feed set, oil return set, 3" turbo downpipe,
inlet pipe set, injector set 475cc, Greddy profec-b electronic
boost controller, EPROM (chip), installation hardware and gaskets.
**Intercooler kit is not included with turbo kits. Must purchase
seperately.
(ATP 1.8T Stage 4)
CDN
$ 6000.00
US
$ 4450.00
*Please call for details and availability |
|
|
*Actual product may differ from photo. |
|
ATP 1.8T Intercooler
Kit
This is a front mounted intercooler kit for Golf / Jetta 4 1.8T
models. Dramatically decreases intake charge air temperature.
All piping, silicone sleeves, and clamps included.
(ATP INT-122)
CDN
$ 1400.00
US
$ 1039.99
*Please call for details and availability |
|
|
 |
| |
| Garrett VW/Audi
Turbo Kit 1.8T |
| |
| This Garrett Turbo Kit is
a drop-in upgrade for the longitudinally mounted 1997 - 2002 1.8T
VW Passat and Audi A4. This upgrade is designed to keep most components
on the stock 1.8T engine such as the exhaust manifold, inlet pipe,
pressure pipes, and oil return line. This upgrade does not alter or
remove any emissions related components. The kit contains a Garrett
GT28R Ball Bearing turbocharger and all of the necessary components
to install the kit. |
CLICK
HERE TO ENLARGE |
|
 |
GT28R Turbo Upgrade . The
Garrett Exclusive Ball Bearing Turbo will give you Unbeatable Response,
Efficiency, and Durability. Absence of a Thrust Bearing Eliminates
Failures at Elevated Boost Levels.
|
| |
|
 |
| Performance
Comparison |
| |
|
|
| |
Stock |
Garrett Turbo Kit |
HP
Torque |
135whp @ 5300rpm
146lbƒ· ft @ 2200rpm |
215whp @ 5400 rpm
215lbƒ· ft @ 5200 rpm
|
|
 |
